Products

Navigation

Communication

ECDIS

Electronic Chart Display & Information System

Enables the navigator to plan the voyage and monitor the route, easier and faster, for safe navigation of the vessel at sea

Uses various types of data from multiple sources including the GPS and AIS, then displays the images on the electronic navigational chart

Reads information about specified areas and triggers alerts when the ship enters a hazardous area where the risk of collision or grounding is higher

MNS-100E Series at a Glance

The MNS-100E series offers powerful route planning and route monitoring capabilities as well as support for electronic navigation charts.

Improved Situational Awareness

Real-time data on ship position, speed, and course, along with other navigational information, provides a comprehensive view of the ship's surroundings

Accuracy

Provides accurate and reliable navigation information, helping to ensure the safe and efficient passage of the ship

Safety

Provides alerts and warnings if the ship is in danger of grounding or colliding with another vessel, helping to ensure safe navigation

Enhanced Efficiency

Helps the navigators optimize the ship’s route and performance so that time and fuel consumption can be reduced

Compliance

Fully compliant with MED regulations: DNV and the Republic of Korea government certified

Integration

Integrates with other shipboard systems, such as the Automatic Identification System (AIS) and the radar system, to provide a comprehensive view of the status of the ship, route, and the sea

USER INTERFACE

The MNS-100E Series provides an intuitive GUI that lets navigators easily utilize the system
User interface ensures important data will be displayed in a fixed position on the screen
Always displays the menu bar on the left and the critical vessel data on the right

ROUTE PLANNING

Integrated route planning and monitoring function which the navigator can use to place waypoints, either graphically on the chart or numerically on the table, and analyze the route
Provides waypoint information such as distance between each waypoint on the route, estimated time for the next waypoint, and estimated total voyage time
Track Control System (TCS): Automatically controls the ship’s course and provides alerts such as route departure warnings and route interference warnings to avoid collision

DISPLAY

Corresponds to electronic navigational charts satisfying IHO S-57, S-63, and S-101
27-inch display providing visibility with wide viewing angles

MED Certified

CERTIFICATES

DNV MED Certificate (ECDIS, TCS)

Catalog

RADAR

Marine RADAR System

MED Certified

Enhances situational awareness for safe navigation at sea

Detects, tracks, and displays objects around the vessel on the screen

Reads information about specified areas and triggers alerts when the ship enters hazardous areas where the risk of collision or grounding is higher

MNS-100R Series at a Glance

The MNS-100R series offers powerful object detection and tracking capabilities

Improved Situational Awareness

Real-time data on ship position, speed, and course, along with other navigational information, provides a comprehensive view of the ship’s surroundings

Accuracy

Provides accurate and reliable object detection, helping to ensure safe navigation even in low visibility conditions

Safety

Provides alerts and warnings if the ship is in danger of grounding or colliding with another vessel, helping to ensure safe navigation

Compliance

Fully compliant with MED regulations, certified by DNV

Integration

Integrates with other shipboard systems, such as the Automatic Identification System (AIS) and the ECDIS system, to provide a comprehensive view of the status of the ship, route, and the sea

RADAR SYSTEM FEATURE

Always displays the menu bar on the left and the critical vessel data on the right
Adjustable range scales: 0.125 – 96 NM
Manual and automatic tuning and clutter reduction supported
2 Electronic Bearing Lines (EBL), 2 Variable Range Markers (VRM)
Target Tracking: Up to 100 targets, Tracking Range 24 NM; 500 AIS targets
Manual and automatic target acquisition
27-inch display providing visibility with wide viewing angles
The MNS-100R Series provides an intuitive GUI that lets navigators easily utilize the system
User interface ensures important data will be displayed in a fixed position on the screen

CERTIFICATES

DNV MED Certificate

Catalog

DIP

Digital Instrument Panel

MDI-5000 · 7000 Series DIP

Provides real-time data and information about the ship’s operation and systems

Computer-based data acquisition and monitoring system collects and displays the data from the sensors and instruments on the ship

Provides warnings and alerts if any systems malfunction or require attention

Intuitively user configurable:

- The display can be configured to match the users’ needs

- The display can dynamically adapt to different situations and change the type of information, which was not possible with analogue instrument panels

The DIP uses various types of data from multiple sources including but not limited to the gyrocompass, GPS, thruster, and the engines, and displays the images on the overhead display

Real-Time Data

Provides real-time data on the ship's operation and systems, allowing the navigators to monitor and adjust performance as needed

Intuitive Data Visualisation

Collects data from multiple sources, including sensors and instruments, providing a more comprehensive view of the ship's status thatlet the navigators see all the necessary information

User Configurable

User-configurable to match the needs of the navigators and the ship's operations

Safety

Provides alerts and warnings if any systems malfunction or require attention, ensuring safe operation of the ship

Integration

Integrates with other shipboard systems, such as CCTV and RADAR systems (AIS information included), providing a more comprehensive view of the ship

CONFIGURATION PANEL

User Configurable

The user can configure the digital information panel to display the data necessary for the ship’s operations.
The user can also choose the size and location of each instrument on the panel.

※ The 13.3” touch display configuration panel controls both starboard side and port side displays

Catalog

CID

Conning Information Display

MED Certified

The Conning Information Display makes key information easily available for effecient monitoring.

Modern ship bridges are overwhelmed with data from countless sensors. Our CID solution streamlines this complexity by consolidating diverse navigational protocols into one intuitive platform. Instead of tracking multiple displays, officers can now gain a complete, real-time overview of the ship’s performance and surroundings through a single, integrated interface

MNS-100C Series at a Glance

Unified Integration

Seamlessly integrates a wide range of equipment, including Gyro, Rudder, and Thrusters, into a single, unified interface.

Operational Visibility

Provides an optimised visual environment with high-resolution graphics, allowing officers to interpret complex data in an instant.

Smart Alert Management

Centralises all alarms to ensure immediate situational awareness and rapid response to potential hazards.

Adaptive User Interface

Maintains peak readability with automatic Day/Dusk/Night mode transitions and customisable layouts tailored to the navigator’s preference.

CERTIFICATES

DNV MED Certificate (CID)

BAM

Bridge Alert Management

MED Certified

Our Bridge Alert Management solution effectively manages the increasing complexity of onboard alerts. By centralising and prioritising notifications from all navigational and machinery systems, it ensures that the bridge team can focus on what matters most: safe and efficient manoeuvring.

MNS-100CA Series at a Glance

Alert Harmonisation

Integrating disparate alarms from multiple bridge sub-systems into a harmonised and consistent display, preventing fragmented situational awareness.

Strategic Prioritisation

Automatically sorting notifications by severity—from Emergency to Caution—ensuring the officer on watch addresses the most critical safety threats first.

CERTIFICATES

DNV MED Certificate (BAM)

INS

Integrated Navigation System

MED Certified

MRC’s Integrated Navigation System (INS) is a cutting-edge solution designed to enhance maritime operations' efficiency, safety, and reliability. By integrating state-of-the-art navigation technologies, MRC provides a seamless and intuitive user experience, ensuring optimal situational awareness for vessel operators.

Benefits of MRC’s INS Solution

Seamless Integratio

Unifies multiple navigational components into a single, complete, user-friendly system

Enhanced Safety

Reduces navigation risks through advanced situational awareness and alarm management

Compliance Ready

Fully compliant with MED regulations, certified by DNV according to international standards (IMO MSC 252(83) and IEC 61924)

Scalable & Customisable

User-configurable design for safe andeasy operation across the applications according to standards

Modular & Scalable Network Infrastructure

MRC INS features a standardised hardware and LAN-based network architecture, providing a robust and adaptable backbone for maritime navigation. Workstations and applications can be easily added and configured, ensuring a highly scalable and customisable system for different vessel types

MRC INS – Fully Compliant & Certified

MRC INS meets the latest maritime safety and regulatory standards, ensuring full compliance with international requirements:

MED-Approved: Compliant with EU 2024/1975, Item No. MED/4.59
SOLAS 74: Meets IMO performance requirements
IMO & IEC Certified: Complies with MSC.252(83) / IEC 61924-2 for Integrated Navigation Systems (INS)

CERTIFICATES

DNV MED Certificate (INS)